Outdoor cinema & LED — supplied, installed & supported Australia-wide
+61 3 8203 5853
Outdoor cinema & LED — supplied, installed & supported Australia-wide
+61 3 8203 5853 
Projection & Weather Tents
An inflatable weather shelter for your projector and AV gear — keeps rain, wind and dew off so the screening goes ahead, with a front projection opening, rear equipment access and propped side vents to stop the kit overheating.
Contact us for current pricing, availability and tailored options.
The weather is the one thing you can't book — and a single passing shower can end an outdoor screening. The Projector Weather Tent takes that risk off the table: an inflatable shelter that keeps your projector and AV gear dry, stable and running, so the show goes ahead whatever the sky is doing.
The tent inflates in minutes into a rigid, self-supporting shelter that houses the projector, media player and audio. A clean front opening lets the projector throw straight onto your screen, while a raked front face sheds rain and wind away from the optics.
A rear access opening lets you get to the projector and equipment mid-event — swap a source, adjust focus or restart a player — without exposing anything to the weather or interrupting the show.
Sealed kit runs hot. The side vents prop open with the supplied poles to keep air moving through the shelter, so the projector and electronics stay within temperature on warm nights and long sessions — full weather protection without the overheating.
Corner anchor points secure the tent firmly to the ground so it holds its shape and position in wind — the same proven anchoring approach we use across our inflatable cinema range.
The Projector Weather Tent pairs with our inflatable and fast-fold screen packages and is scoped to your projector, screen size and site. Tell us what you're running and the conditions you need to cover, and we'll recommend the right shelter.
Built for the weather
An inflatable shelter that keeps your projector and AV gear dry, cool and running — so a passing shower doesn’t end the screening.
A clear front opening lets the projector throw straight onto the screen, while the raked front face sheds rain and wind away from the optics — full protection without compromising the image.
A rear access opening lets you get to the projector and media player to swap a source, adjust focus or restart — without breaking down the setup or exposing the kit to the weather.
Sealed kit runs hot. Propped side vents keep air moving through the shelter so the projector and electronics stay within temperature on warm nights — full weather protection without the overheating. Corner anchor points hold it firm in wind.
Yes — it inflates in minutes into a rigid, self-supporting shelter, run from a continuous blower like our inflatable screens (the blower isn't included, but we can supply one), then packs down small for transport and storage.
No — the side vents prop open with the supplied poles to keep air moving through the shelter, so the projector and electronics stay cool while staying fully sheltered from the weather.
There's a rear access opening, so you can get to the projector and equipment to adjust focus, swap a source or restart a player without exposing the kit to the weather.
Yes — corner anchor points secure it to the ground so it keeps its shape and position, using the same anchoring approach as our inflatable screens.
Pricing is scoped to your setup. Tell us your projector, screen size and the conditions you need to cover, and we'll quote the right shelter.
Tell us about your site and audience. We scope, supply and support outdoor cinema and permanent LED systems Australia-wide.