LED Display
Daylight-readable outdoor panels, front & rear maintenance access
Outdoor cinema & LED — supplied, installed & supported Australia-wide
+61 3 8203 5853
Outdoor LED Displays
A 3m-wide (≈6m²) cinema-grade outdoor LED screen — 2.6mm pitch, 1152 × 768, daylight-readable to 7,000 nits, IP69K-rated, with fully integrated DSP audio and cloud control. A complete, permanent turnkey installation. Price on application.
Contact us for current pricing, availability and tailored options.
Daylight-readable outdoor panels, front & rear maintenance access
Engineered to AS standards with wind-rating certification
Full installation, electrical works and certified termination
Media player, processor and signal infrastructure
Browser-based scheduling via Cloud Cinema Pro
IP-rated speakers, DSP and subwoofer for cinema-grade sound
Manufacturing-to-site coordination, lifting and rigging
Footings, mounting and site-specific making good
A 3m x 2m outdoor LED wall — about 6 square metres — running a 2.6mm pixel pitch at 1152 x 768. The distinction from advertising signage is what goes into it: gold-wire bonded LEDs for outdoor life, a 4,500:1 contrast ratio, and a refresh rate between 3,840Hz and 7,680Hz, which is what stops the panel strobing when a phone or broadcast camera is pointed at it.
At 2.6mm pitch the image holds together from roughly 2.6 metres back, so this size suits venues where the audience is relatively close — courtyards, pool decks, clubrooms, boutique holiday parks, hotel terraces. Power draw works out around 1.2kW at the stated 193 W/m² average, which is generally within what an existing supply can take without new infrastructure. That combination — close viewing, modest power — is what makes 3m the practical entry point to a permanent LED installation.
Supplied as a complete installation: engineered frame, mounting, commissioning, integrated IP-rated speakers with DSP and subwoofer, and Cloud Cinema Pro for browser-based scheduling. The cabinet is die-cast aluminium, salt-spray resistant and rated IP69K, with both front and rear service access so maintenance never depends on getting behind the structure. Certified to CE, UL, FCC, UKCA and BS 476 fire. Dimensions are indicative and confirmed at site visit; price on application.
The cinema-grade difference
Four things separate a cinema-grade LED install from the signage panels most suppliers sell — and they're exactly where a movie lives or dies.
A fine 2.6mm pixel pitch, 3-in-1 SMD LEDs and factory colour calibration mean fast-moving film stays sharp and smooth — no smearing, no scan lines, clean on camera and live-stream. Signage LED, built for static ads, can't hold a moving picture the same way.
Cheap LED fails — dead pixels, patchy brightness, colour drift within a season or two. Ours uses gold-wire bonded LEDs and a die-cast aluminium cabinet that shrugs off salt spray, with IP69K weatherproofing — the highest ingress grade, well above the IP65 most outdoor LED carries — and front and rear service access. The same hardware class runs at landmark venues worldwide.
Every install includes IP-rated outdoor speakers with dedicated amplification, DSP and subwoofer — tuned to the audience footprint, with genuine cinema low-end. Engineered in from day one, not afterthought speakers bolted to a frame.
Schedule content, push updates and monitor screen health remotely through Cloud Cinema Pro — our browser-based cloud-control platform. Non-technical staff can keep the screen programmed and running, day after day, with alerts before your audience notices a problem.
Price is on application. A permanent LED install is scoped per site — exact dimensions, mounting, structure, power, audio and civil works are confirmed at a site visit, then a fully scoped proposal with accurate pricing follows. Tell us about your site and we'll arrange one.
Indicatively ≈3.0m × 2.0m (≈6m² display area, 1152 × 768 at 2.6mm pitch). Final dimensions are confirmed at the site visit to suit position, viewing distances and structure.
It's commercial-grade, not signage or event-hire stock: 2.6mm pitch and 3-in-1 SMD for crisp motion, daylight-readable to 7,000 nits, gold-wire bonded LEDs and a die-cast aluminium cabinet for long outdoor life, and IP69K weatherproofing — the highest ingress grade, well above the IP65 most outdoor LED carries. The same hardware class runs at landmark venues like Federation Square and ICC Sydney.
Tell us about your site and audience. We scope, supply and support outdoor cinema and permanent LED systems Australia-wide.